“A …Lost classic, digitally re-mastered.”

The Quiver Killer is one of ...lost's all time best selling and most loved models.  Popular around the world.  It was one of the original modern hybrid shapes, that worked in all types of conditions, from 2’ slop to 6’ tubes.  An early 5-fin adapted model, it can be adjusted with fins, for waves of all types and sizes.

A literal one board quiver, thus the name, Quiver Killer.  Its forward outline and fairly wide nose lend plenty of forward momentum, both paddling and once you’re on your feet.  Drive is not an issue here.  The generous width and continuous curve outline, with a modestly pulled in rounded pin tail, give both lift in smaller surf and speed control with precise turning and carving, with confidence in better waves.  The nose rocker is moderate, pairing well with the width up front and it initiates into turns with forward momentum.

The tail rocker is lower. It’s fast and drivey, featuring a clean concave and enough curve in the rail rocker to turn well under the rear foot without stiffness.  This little board proves itself again and again, with its ability to perform in all conditions, under the feet of local and traveling surfers around the world.

Matt Biolos had not adjusted the design in years, simply re-sizing for custom orders as retailers slowly stopped stocking them, in lieu of newer ...lost models.  With the constant updating and releasing of new models, the Quiver Killer somehow got lost in the mix.  Relegated to custom orders and a few smart shops who still stocked them, Matt felt the time has come to bring back some of our best models from the past and give them a subtle make-over.  Considering the new builds and techs he has been working with the last 5 years, it makes perfect sense to finally offer some of our classics like the Quiver Killer, in the new, modern materials and ride characteristics.

Not a full re-design, nor a major up-date, that would require a new name and lots of RnD, but a smooth and simple “Digital Re-Master”, to the older CAD files, which could use a bit of cleaning up. Not wanting to inherently change the design, Mayhem went in and “Re-Mastered” each size, fine tuning the files to cut clean, and shine in a new way.  Dims and details stayed on point with the past, but subtle curves cleaned up for ease of shaping, manufacturing and end use enjoyment.

Along with the Digitally Re-mastered files, Mayhem brought the branding up to pace with modern taste and designed a fresh new package, with subdued, stylish colors built into smaller sized logos, to finish this refresh in a 2025 way.

Please note-If you would like to check what LIGHTSPEED II SPRAY colour is available in your size, please contact us via email or phone and we can check for you PRIOR to making your purchase online.

Lightspeed II is Lost's brand new ProFormance Epoxy surfboard construction built with lightweight EPS foam and high strength epoxy resin. It uses a combination of Rapid-Reflex Carbon Fiber as well as vibration dampening Innegra-Fibers, woven into the finest custom performance fiberglass cloth. Along with speed and performance advancements, LightSpeed II also features:

ULTRA-LIGHT / ULTRA-LIVELY FOAM CORE:

Steam molded, high strength-to-weight ratio, fused cell, water resistant, stringer-less EPS foam core.

ADVANCED EPOXY RESIN SYSTEM:

Super high-strength, flexible and impact resistant, allowing you to perform at your peak while making the board super durable.

WOVEN CARBON FIBER CENTERLINE “STRINGER” (TOP AND BOTTOM):

Engineered to add both strength and Rapid-Reflex “pop”, with just enough release to feel forgiving underfoot. The Carbon loads up under foot pressure, and springs upon release.

FUSED CARBON, TAIL REINFORCEMENT PATCHES:

Transfers more direct input into rail and adds strength.

CENTERLINE ALIGNED CARBON “EXO-STRINGERS”:

Enable natural Torsional Twist, similar to a wood stringer board, but lighter, and with a much faster reflex reaction and more “pop”.

INNEGRA INFUSED, ENGINEERED COMPOSITE FIBERGLASS:

A multi weave (6oz lengthwise, woven with 4oz, rail to rail) fiberglass, top and bottom, adds significant break strength, while keeping the boards ultra-light and ultra-lively.